Hook Tight Knot Tool: Step-by-Step Instruction Guide
Phase 1: Securing the Hook & Initial Line Placement
Step 1: Select your fishing hook
Step 2: Insert the hook shank firmly into the dedicated central hook holder slot
Step 3: Form a small, clean loop near the end of your fishing line
Step 4: Slide this loop underneath the spring-loaded line holder on the left side of the device to anchor it
Phase 2: Threading the Knotting Mechanism
Step 5: Pull the running line straight across from the left side, passing it through the center channel, and thread it into the clip on the far right
Step 6: Loop the line over the orange line slider tab located on the right edge of the wheel
Step 7: Bring the line back toward the left side, ensuring it rests securely inside the hook holder assembly
Step 8: Guide the remaining line up and over the back of the tool's upper wheel mechanism
Phase 3: Wrapping and Tying the Knot
Step 9: Push the ribbed orange button on the left side downward into the "ON" position to engage the motorized wheel. Let it spin to wrap the line perfectly around the hook shank
Step 10: Slide the orange line slider tab manually along the track from the right side over to the left side
Step 11: Pull firmly on the tag end of the line extending from the back of the tool to gather and pre-tighten the wraps
Phase 4: Releasing and Finalizing
Step 12: Release the initial line anchor by unclipping the line holder on the left
Step 13: Press the release mechanism to disengage the hook holder
Step 14: Then carefully pull the finished line and hook out of the tool
Step 15: Give the line a final firm tug to secure the cleanest, strongest, and most reliable fishing knot possible
We also want our customers to get creative — try tying your own knots and find what works best for you!
If you have any questions or suggestions, email us at: hooktight.co@gmail.com
